Maglite suppressor elements for sale

Place to buy and sell your parts and accessories!

Moderator: AGG

Post Reply
User avatar
bulm5
Posts: 11
Joined: Sun May 29, 2016 1:27 am
Location: Mauritius

Maglite suppressor elements for sale

Post by bulm5 » Fri Nov 30, 2018 1:34 pm

Hello,


I successfully completed my maglite suppressor project for a Valmet .308 so I am selling all the spare parts that I have and do not use, all will be shipped as maglite parts, no issue to import the parts but once you assemble them to have a functioning suppressor, you should abide by the laws regarding suppressors in your country.
using these affordable parts, I manage to reduce the noise level generated by a.308 on my Valmet by 50%, enough not to use ear protection and makes plinking very pleasant, so I am satisfied.

FOR SALE:
5 genuine D cell Maglite tubes with an internal diameter of 34mm ( the Led rechargeable type, so without hole for switch, ready for suppressor use, threaded on both sides), the tube are in VGC but the blueing has been erased, high temp spray paint is good to improve the look, but not at all necessary.
All 5 tubes come with a threaded exit end cap centered and pre-drilled to approx .30 or less, depending on your caliber.

PRICE OF A THREADED MAGLITE TUBE AT BOTH ENDS WITH A DRILLED & THREADED EXIT END CAP IS 50 USD INCLUDING AIR MAIL POSTAGE (worldwide)

For the barrel end, the following high quality drilled and threaded barrel end cap are available for the following pitch:

1 D cell 3/4 NPT
1 D cell 1/2'' - 28
1 D cell 13/16'' - 16
1 D cell 1/2'' - 20
1 C cell 1/2'' -20

FYI, I used a thread pitch of 5/8'' -24 for my suppressor.

THE PRICE OF A HIGH QUALITY DRILLED AND THREADED END CAP OF YOUR CHOICE IS 12 USD INCLUDING AIR MAIL POSTAGE (worldwide)


the following 34mm washers are available,they will fit the tube and all you need is spacers in between:

10 x steel freeze plugs 34mm, not drilled, PRICE FOR 10 FREEZE PLUG WASHERS IS 25 USD INCLUDING AIR MAIL POSTAGE (worldwide)
20 x blue alu spacers 34mm centered and drilled to 8mm, ready to use or to be drilled to your caliber, PRICE FOR THE 20 ALU BLUE WASHERS IS 40 USD INCLUDING AIR MAIL POSTAGE (worldwide)

the following spacers are available:

8 heavy duty copper spacers 34mm diameter x 25 mm in length, Ideal as first spacer after the muzzle PRICE FOR 1 COPPER SPACER IS 5 USD INCLUDING AIR MAIL POSTAGE (worldwide)

16 polycarbonate 34mm spacers of various length, 5 POLY SPACERS FREE OF CHARGE ON REQUEST WITH ANY ORDER

Additional pics on request. payment via paypal.

Best regards,

Fred
Attachments
20181201_010957.jpg
20181201_010921.jpg
20181201_010826.jpg
20181201_010722.jpg
20181201_010628.jpg
20181201_010330.jpg
20181201_010318.jpg
20180824_203647aa.jpg

Post Reply