Galatz Sniper Rifle Project

A place for Galils of any nationality!

Moderator: nib

Post Reply
sawed12
Posts: 6
Joined: Fri Jun 12, 2015 5:32 pm
Location: mid west

Galatz Sniper Rifle Project

Post by sawed12 » Tue Jun 16, 2015 11:47 pm

Galatz Sniper Rifle Project

I've been collecting the needed parts to build a Galatz rifle. I have almost everithing minus the elusive gas block and scope with mount.

All the parts are factory for the exception of the receiver. I will most likely build it on the CNC/W slab side receiver in the picture , unless a Galil receiver pops up.

The furniture are two different shades not sure what to do with that yet.
Hand guard is new, butt stock is used and needs a little TLC.

looking for a little help locating the missing parts to go forward with re-birthing one of these historic rifles. Should anyone have parts or leads, connections,?? Your help would be appreciated.

Mike
Attachments
IMG_1479.JPG

AGG
Posts: 2022
Joined: Wed May 30, 2007 11:32 am
Location: Alabama

Post by AGG » Wed Jun 17, 2015 5:51 am

Mike,

Welcome to the site--- nice build in progress!!! :D

Tony

sawed12
Posts: 6
Joined: Fri Jun 12, 2015 5:32 pm
Location: mid west

Post by sawed12 » Wed Jun 17, 2015 12:40 pm

Tony, Thank you for the welcome.

Looking forward to hearing from any members that may help with this project.

Mike

AGG
Posts: 2022
Joined: Wed May 30, 2007 11:32 am
Location: Alabama

Post by AGG » Fri Jun 19, 2015 5:47 am

Mike,

You are welcome--- you also may want to post your query on the AKForum!!! :D

Tony

D.Brown
Posts: 112
Joined: Tue Jun 08, 2004 8:14 pm

Post by D.Brown » Wed Aug 12, 2015 3:25 am

Apex currently has small parts like the mag catch.

Their prices are lower than the competition and their descriptions of conditions I have found to be accurate. Please note that weapons are not lightly surplused out of Israel. These rifle were used, and abused. The parts remaining for individual sale will not likely be the best either.

IWI usa did have some small number of parts for the galil on their site. Springs for the night sights, both front and rear. Little things that would be a right chore to reproduce accurately.

DB
Jurisprudence, the daughter of philosophy willing to compromise herself for profit.

sawed12
Posts: 6
Joined: Fri Jun 12, 2015 5:32 pm
Location: mid west

Post by sawed12 » Sat Oct 03, 2015 7:07 pm

still looking for the gas block and scope/mount

sawed12
Posts: 6
Joined: Fri Jun 12, 2015 5:32 pm
Location: mid west

Post by sawed12 » Fri Nov 06, 2015 8:51 pm

still looking

sawed12
Posts: 6
Joined: Fri Jun 12, 2015 5:32 pm
Location: mid west

Post by sawed12 » Sun Aug 28, 2016 12:22 am

looking for the gas block/barrel and offset scope mount.

Just a few more parts.

Post Reply