M76 tube folder in 7.62X39 MILLED RECEIVER

Discussion forum for all things Valmet!

Moderator: AGG

Post Reply
cscprez
Posts: 3
Joined: Wed May 09, 2018 11:26 am

M76 tube folder in 7.62X39 MILLED RECEIVER

Post by cscprez » Wed May 23, 2018 7:07 am

The subject rifle, with Valmet scope top cover including rings, 3 30 round mags with lanyard rings, 1 15 round mag, green leather sling, original cleaning kit and original box and documentation. Also has an ejection port buffer, but the rubber is dried out. The tritium is dark.
It has been test fired and is in approximately 99% condition with a few storage marks.
The folding mechanism is similar to a Galil.
I have been told that this rifle doesn't exist and must be a counterfeit, but IF my friend ever wanted to sell it, to make sure I call this dealer.
Others have told me that it is pretty rare and can be worth quite a bit.
Can anyone give me any information about it?
Asking for a friend...

dnepr0mike
Posts: 12
Joined: Sat Jan 13, 2018 4:16 pm

Re: M76 tube folder in 7.62X39 MILLED RECEIVER

Post by dnepr0mike » Wed May 23, 2018 8:57 am

picture is worth a thousand words.

cscprez
Posts: 3
Joined: Wed May 09, 2018 11:26 am

Re: M76 tube folder in 7.62X39 MILLED RECEIVER

Post by cscprez » Thu May 24, 2018 4:50 am

IMG_0962.JPG

AGG
Posts: 2042
Joined: Wed May 30, 2007 11:32 am
Location: Alabama

Re: M76 tube folder in 7.62X39 MILLED RECEIVER

Post by AGG » Thu May 24, 2018 11:57 am

Can you PM me the full serial number and date on the blue/white card (exactly as it appears)??? :D
I can check it against my list, and provide you whatever information that you need. :wink:

Tony

cscprez
Posts: 3
Joined: Wed May 09, 2018 11:26 am

Re: M76 tube folder in 7.62X39 MILLED RECEIVER

Post by cscprez » Mon May 28, 2018 3:25 am

It looks like I'm unable to send PMs. I have a query in to the board moderator.
The message is sitting in my outbox.

AGG
Posts: 2042
Joined: Wed May 30, 2007 11:32 am
Location: Alabama

Re: M76 tube folder in 7.62X39 MILLED RECEIVER

Post by AGG » Mon May 28, 2018 2:16 pm

PM received--- thanks--- PM to you with information!!! :wink:

Tony

Post Reply