Finnish Goodness

If you have a collection that you're proud of or if you just want to show off that cool pic this is the place to post.

Moderator: Tallin

reckoner1
Posts: 47
Joined: Tue Feb 06, 2007 12:05 pm

Finnish Goodness

Post by reckoner1 » Sun Feb 21, 2010 2:16 pm

Here's a few on my Finnish toys. Second pic is an ongoing project and am pretty close to having all the parts.

Image

Image

JMikeSteen
Posts: 1085
Joined: Mon Oct 20, 2003 6:28 pm
Location: Sitting right next to a gator in the Everglades with a gun in my hand

Post by JMikeSteen » Sun Feb 21, 2010 2:56 pm

most bute-i-mous
Presidential Primary - vote for 1 of 5 or so *hitheads you don't want.
Presidential Election - vote to stop the other *hithead from winning.
Result, it didn't work.

AGG
Posts: 2046
Joined: Wed May 30, 2007 11:32 am
Location: Alabama

Post by AGG » Mon Feb 22, 2010 12:08 pm

Awesome collection--- what parts are you needing for the build??? :D

Tony

JMikeSteen
Posts: 1085
Joined: Mon Oct 20, 2003 6:28 pm
Location: Sitting right next to a gator in the Everglades with a gun in my hand

Post by JMikeSteen » Mon Feb 22, 2010 12:31 pm

looks mostly like that thang that goes in the middle Tony. :D :D :D
Presidential Primary - vote for 1 of 5 or so *hitheads you don't want.
Presidential Election - vote to stop the other *hithead from winning.
Result, it didn't work.

User avatar
nib
Posts: 507
Joined: Mon Sep 22, 2003 5:43 pm
Location: Southern Louisiana 32.6 miles north of HELL

Post by nib » Mon Feb 22, 2010 3:36 pm

Nice carpet. Your wife is going to kill you if you get oil on it.

Very Nice Valmets The 78 in 7.62x39 just looks right with the drum in place.
I just need a 76 milled folder in 7.62 x 39. and I swear to GOD I will stop.

JMikeSteen
Posts: 1085
Joined: Mon Oct 20, 2003 6:28 pm
Location: Sitting right next to a gator in the Everglades with a gun in my hand

Post by JMikeSteen » Mon Feb 22, 2010 4:24 pm

he ain't got no wife (or shes out of town) or that rifle would not be on the floor :D :D
Presidential Primary - vote for 1 of 5 or so *hitheads you don't want.
Presidential Election - vote to stop the other *hithead from winning.
Result, it didn't work.

reckoner1
Posts: 47
Joined: Tue Feb 06, 2007 12:05 pm

Post by reckoner1 » Mon Feb 22, 2010 8:34 pm

HA! You guys are crackin me up! If we ever end up anywhere near each other the first rounds on me. :D Oh.....and bang on Mike! No ring on my finger so if there's oil on the carpet....well there's oil on the carpet!

Not too many parts left for the Sako build.

- Gas tube
- Recoil spring guide
- Selector lever
- Small piece that screws onto barrel (before muzzle brake) and locks the muzzlebrake.
- Pin for the gas lever
- Flip up front night sight
- Flip up rear night sight (thin style, not round), think I got an RK95 top cover.
- Winter style trigger guard

Also need a Galil knuckle modified to fit. The selector and gas tube are not a big deal as I can use M76 parts if necessary but trying to get a perfect match. They're not pictured but I do have the correct plastic handguards as well. Have been putting this together for awhile now. To say these parts are unobtanium is a bit of an understatement.

Cheers

Samppa V
Posts: 137
Joined: Fri May 25, 2007 9:02 am
Location: Finland
Contact:

nice family portrait

Post by Samppa V » Mon Feb 22, 2010 10:06 pm

That's very nice family!
Keep your fingers crossed, you newer know what could be found if you keep your eyes open :D
Gas piston is the way to go!

User avatar
Tom Doniphon
Posts: 1004
Joined: Mon Sep 22, 2003 2:38 pm
Location: West of the Picket Wire

Post by Tom Doniphon » Mon Feb 22, 2010 10:42 pm

If your girlfriends see the way you look at those Valmets they are going to get down on the carpet next to them.
Last edited by Tom Doniphon on Tue Feb 23, 2010 10:58 pm, edited 1 time in total.

reckoner1
Posts: 47
Joined: Tue Feb 06, 2007 12:05 pm

Post by reckoner1 » Mon Feb 22, 2010 10:57 pm

Thanks Samppa - You da man!

Tom - That sounds like a good idea! :D

User avatar
nib
Posts: 507
Joined: Mon Sep 22, 2003 5:43 pm
Location: Southern Louisiana 32.6 miles north of HELL

Post by nib » Tue Feb 23, 2010 6:31 pm

Are we about to get a Chicks with Guns section on Valmet.org :idea: :D
I do recall a rather large chick with a hat holding a 76 on the boards years back.

Time to rent some strippers and get the guns out.
I just need a 76 milled folder in 7.62 x 39. and I swear to GOD I will stop.

JMikeSteen
Posts: 1085
Joined: Mon Oct 20, 2003 6:28 pm
Location: Sitting right next to a gator in the Everglades with a gun in my hand

Post by JMikeSteen » Tue Feb 23, 2010 6:41 pm

Tom?
Presidential Primary - vote for 1 of 5 or so *hitheads you don't want.
Presidential Election - vote to stop the other *hithead from winning.
Result, it didn't work.

M62/M76
Posts: 431
Joined: Sat Oct 08, 2005 12:30 pm
Location: Washington State

Post by M62/M76 » Tue Feb 23, 2010 11:15 pm

What, no M62?!
Nice Valmet collection! 8)

User avatar
CelticSword
Site Admin
Posts: 667
Joined: Thu May 26, 2005 3:02 pm
Location: The Great NorthWoods, USA
Contact:

Post by CelticSword » Sun Feb 28, 2010 5:24 am

If you get a picture of this collection with a nice background, I would like to post it on the ValmetWeapons site.

Very rare to have that many Val's in one room

zz_denis
Posts: 30
Joined: Sun Mar 23, 2008 10:44 am

Post by zz_denis » Wed Apr 14, 2010 1:13 pm

Awesome collection!

What are you gonna use for receiver on the M95 clone?

Post Reply